Our Services • Liner


Typical installation


Typical installation Typical installation

Sani-Way Liner

 

  • From manhole to manhole
  • Jointless
  • Enviromental friendly
  • No digging in streets
  • Normal 12 hour operation
  • Less expensive (compared to excavation street)
  • No muddy streets
  • Less traffic interruption
  • Water inversion 

 


Liner Liner
Wet out Liner with resin and loading in reefer trailer.

 BEFOREAFTER
  
 BEFORE AFTER
 Before After 

Product Product

Product Specification


Radial Seam Strength - Measures the strength of the CIPP seam.


Longitudinal Tensile Strength - Ensures the burst strength of the pipe.

 

INSTALLED
PIPE THICKNESS (MM)

4.5
6.0
7.5
9.0
10.5
12.0
13.5
15.016.5
18.0
19.5
21

RADIAL SEAM
STRENGTH (lb/in)**

95120
145
175
200
225
250
275
300
325
350
375

LONGITUDINAL TENSILE
STRENGTH (lb/in)**

70
87.5
105
120
140
155
170
185
200
215
230
245

 

Pipe Diameter - Sani-Way Liner is designed with a 9% reduction in diameter to meet ASTM 1216 requirements for stretch and tight fit.

 

Pipe Identification - Every five feet of Sani-Way Liner is marked with the following information: FOOTAGE - DIAMETER - THICKNESS - LOT NUMBER

 

Coating Adhesion - Styrene Test - During the wet-out and until the resin is cured the coating is exposed to styrene. Styrene attacks most coating materials. If the coating is compromised,  resin washout can occur. We test for coating adhesion with a hot styrene test.

 

Pipe Diameter - The coated material diameter is controlled to +/- 3/8" and the plain felt to +/- 1/2".


 

* Data is based on a lower limit of average values at a -3 sigma. ASTM Test Method D461.


* Information in this specification is deemed correct. No warranty is implied or given.


Sani-Way, a confident choice !
© Sani-Way Inc. 2000 - 2018
Designed by Concept J Multimedia Inc. Managed by 123Clik